Indian Journal of Nuclear Medicine

ORIGINAL ARTICLE
Year
: 2018  |  Volume : 33  |  Issue : 1  |  Page : 1--5

Radiation dose to the occupational worker during the synthesis of 188Re-labeled radiopharmaceuticals in the nuclear medicine department


Parul Thakral1, Jyotsna1, Pankaj Tandon2, Sugandha Dureja1, Vineet Pant1, Ishita Sen1 
1 Department of Nuclear Medicine, Fortis Memorial Research Institute, Gurgaon, Haryana, India
2 Medical Applications Section, Radiological Safety Division, Atomic Energy Regulatory Board, Government of India, Niyamak Bhavan-B, Anushakti Nagar, Mumbai, Maharashtra., India

Correspondence Address:
Dr. Ishita Sen
Department of Nuclear Medicine, Fortis Memorial Research Institute, Gurgaon, Haryana
India

Aim: The aim of this study is to estimate whole-body radiation dose to the radiopharmacist involved in labeling of three different 188Re-labeled compounds, namely, 188Re-Lipiodol, 188Re-tin colloid, and 188Re-hydroxyl-ethylidene-diphosphonate (HEDP) and to compare the occupational burden with the dose limits recommended by Atomic Energy Regulatory Board, India. Materials and Methods: The Department of Nuclear Medicine at Fortis Memorial Research Institute currently synthesizes three different Rhenium-188 labeled compounds, namely, 188Re-Lipiodol, 188Re-HEDP, and 188Re-tin colloid. To estimate the radiation exposure to the radiopharmacist involved in the synthesis, a survey meter was used to measure radiation level before the start of labeling procedure in the radiopharmacy by keeping it at the location where the radiopharmacist normally stands during preparation. Data were collected for 6 syntheses of each 188Re-Lipiodol, 4 for 188Re-HEDP, and 3 for 188Re-tin colloid followed by the quality control. The pocket dosimeter was used by the radiopharmacistat chest level, performing the labeling of 188Re-labeled compounds. All radiopharmaceuticals were synthesized by a single radiopharmacist. Results: 1850 MBq (50 mCi) 188W-188Re generator was eluted before the preparation of each radiopharmaceutical. The amount of 188ReO4- used for labeling with lipiodol/4-hexadecyl-1,2,9,9-tetramethyl-4,7-diaza-1,10-decanethiol, HEDP, and Tin colloid was in the range of 3182–4440 MBq (86–120 mCi), 2812–3774 MBq (76–102 mCi), and 962–1295 MBq (26–35 mCi), respectively. Meantime required to complete the synthesis was 95, 40, and 131.5 min, respectively. Mean whole-body effective dose received was 0.052, 0.009, and 0.004 mSv, respectively, as measured by using the pocket dosimeter. Conclusion: From this small study, we observed that the whole-body radiation dose to the radiopharmacist in radiolabeling and quality control of 188Re-labeled radiopharmaceuticals is within prescribed limits at the current synthesis frequency.


How to cite this article:
Thakral P, Jyotsna, Tandon P, Dureja S, Pant V, Sen I. Radiation dose to the occupational worker during the synthesis of 188Re-labeled radiopharmaceuticals in the nuclear medicine department.Indian J Nucl Med 2018;33:1-5


How to cite this URL:
Thakral P, Jyotsna, Tandon P, Dureja S, Pant V, Sen I. Radiation dose to the occupational worker during the synthesis of 188Re-labeled radiopharmaceuticals in the nuclear medicine department. Indian J Nucl Med [serial online] 2018 [cited 2018 Sep 19 ];33:1-5
Available from: http://www.ijnm.in/article.asp?issn=0972-3919;year=2018;volume=33;issue=1;spage=1;epage=5;aulast=Thakral;type=0